Nylon Sling Protector Sleeve Types & Specifications
The round sling protection sleeve is not subjected to force and is mainly used for protection. It is also made of the same material as the sling body, PES, and knitted into a sleeve that is either free from the sling body or equal to the length of the sling body. The corner protectors are often placed at the bends when lifting objects and are made of nylon sling protector sleeve for easy opening and closing of the corner protectors. Both can play a protective role in the case of damage to the belt body.
We offer these sling products for use with a protection sleeve：
Type of web sling protection sleeve
The sling protection sleeve is divided into three forms of A/B/C, with different sewing shapes, category A and B are cylinder (single and double layer), and category C is hanging basket. According to different use scenarios to choose, such as the surface is not very flat larger tons of heavy loads, using the top and bottom of the two layers of the B-type sheath.
Basket shaped sheaths allow one side of the flat sling to be protected, and when in use it is mostly one of the layers that is in contact with the object being lifted, so they are also a more suitable choice.
The round sling protection sleeve protects against abrasion and corrosion and increases friction. Very often, the surface of the object to be lifted is rough, there are sharp edges and corners, the sling is in direct contact with the sling, it is very easy to be damaged, affecting the strength and service life of the sling, the sling plays a crucial role in protection. The corner protector can withstand large tensile force, with the sling can safely lift high-density heavy objects, the quality of lightweight, wear-resistant, to protect the sling from sharp edges cut at the same time, will not excessively increase the load of the lifting system.
Nylon sling protector sleeve specifications:
Sleeve color follows the same webbing sling color code.
Width 40mm, Safe Working Load 1T, A50mm, B30mm, C60mm, Weight 0.51kg
Width 50mm, Safe Working Load 2T, A60mm, B33mm, C65mm, weight 0.70kg.
Width 60mm, safe working load 3T, A70mm, B38mm, C70mm, weight 1.02kg
Usage Scenarios
The sheath needs to be matched with a compatible sling, how to choose can be referred to: How to choose a best webbing sling belt？
Objects with sharp edges and corners: such as steel components and stones at construction sites, the sharp edges and corners of these objects are very easy to cut the sling during the lifting process, using the sling protector can avoid the direct contact between the sling and the sharp edges and corners, preventing the sling from being cut and abraded, and minimizing the safety risk.
Rough surface of objects: like unpolished logs, metal products with bumps or burrs on the surface, etc., the rough surface will generate greater friction with the sling during lifting, resulting in wear of the sling, and the use of a protective cover at this time can play a role of isolation and buffer to protect the integrity of the sling.
In addition, for round slings with eyelets, the body of the sling comes with a sheath by default, which plays a protective role.For example, this 3-ton round sling belt with a red sheath:
